Commercial / Industrial Membrane Elements

HYDRON Commercial/Industrial Membrane Elements with their hard shell fiberglass exterior provide outstanding performance for commercial/industrial systems. HYDRON Membranes are manufactured in a State-of-the-Art, ISO-9001-2000 certified automatic rolling facility which provides you with a precise and advanced membrane element. HYDRON Membranes not only deliver an attractive cost to benefit ratio, but also gives you a membrane that has consistently high quality and performance.

HYDRON Commercial/Industrial Membrane Elements can be used in a variety of applications, such as car wash, bottling, manufacturing, water stores, food processing, and many other applications where a reliable, performance membrane is needed.

SKU: BW / HLP Series Categories: ,
BW / HLP Membrane Specifications – Commercial / Industrial
Series Part Number Applied Pressure psi (bar) Average Permeated Flow gpd (m3/d) Stable Rejection Rate (%) Active Membrane Area ft2 (m2) Max. Feed Temp. °F (°C)
BW BW-8040 225 (15.5) 11500 (43.5) 99.5 440 (41) 113 (45)
HLP HLP-8040 150 (10.3) 13000 (49.2) 98.0 400 (37) 113 (45)
BW-8040
MEMBRANE TYPE Polyamide Compound
TESTING CONDITIONS
Testing Pressure 225 psi (1.55 MPa) (15.5 bar)
Temperature of Testing Solution 77 °F (25 °C)
Concentration of Testing Solution (NaCl) 2000 ppm
pH Value of Testing Solution 7.5
Recovery Rate of Single Membrane Element 15%
EXTREME OPERATION CONDITIONS
Max. Working Pressure 600 psi (4.14 MPa) (41.4 bar)
Max. Feedwater Flow 75 gpm (17 m3/hr)
Max. Feedwater Temperature 113 °F (45 °C)
Max. Feedwater SDI 5
Single Membrane Max. Pressure Drop 15 psi (0.1 MPa) (1.03 bar)
Residual chlorine Concentration of Feedwater <0.1 ppm
pH Range of Feedwater during Continuous Operation 3~10
pH Range of Feedwater during Chemical Cleaning 2~12
HLP-8040
MEMBRANE TYPE Polyamide Compound
TESTING CONDITIONS
Testing Pressure 150 psi (1.03 MPa) (10.34 bar)
Temperature of Testing Solution 77 °F (25 °C)
Concentration of Testing Solution (NaCl) 1500 ppm
pH Value of Testing Solution 7.5
Recovery Rate of Single Membrane Element 15%
EXTREME OPERATION CONDITIONS
Max. Working Pressure 600 psi (4.14 MPa) (41.4 bar)
Max. Feedwater Flow 75 gpm (17 m3/hr)
Max. Feedwater Temperature 113 °F (45 °C)
Max. Feedwater SDI 5
Single Membrane Max. Pressure Drop 15 psi (0.1 MPa) (1.03 bar)
Residual chlorine Concentration of Feedwater <0.1 ppm
pH Range of Feedwater during Continuous Operation 3~10
pH Range of Feedwater during Chemical Cleaning 2~12
BW-8040 / HLP-8040
A=40” (1016 mm) B=7.95” (201.9 mm) C=1.125” (28.6 mm)