,

4” FRPV Membrane Housings

HYDRON 4″ FRPV Series II Membrane Housings are durable composite reinforced membrane vessels designed for use in commercial and industrial Reverse Osmosis systems. FRPV vessels are coated with high gloss polyurethane paint to provide resistance to UV rays and other elements.

HYDRON 4″ FRPV Series II Membrane Housings can accommodate any standard 40” membrane element, have a compact design and offer a reliable head seal area. Hydron FRPV membrane housings are made to meet the demands of long term and continuous use.

  • Accommodates all standard 4″x 40″ membrane elements.
  • Locking plate with allen head bolts for easy maintenance and safety.
  • Manufactured to meet the demands of long term and continuous use.
  • High Gloss Polyurethane Exterior Coating for resistance to UV rays and other elements.
  • Compact design for commercial and industrial reverse osmosis and ultrafiltration applications.
SKU: 4” FRPV Series Categories: ,
4” FRPV Membrane Housings
Elements Part Number Maximum Operating Pressure Maximum Operating Temperature Minimum Operating Temperature Inlet Port Permeate Port
1 FRPV-4030EF 300 psi (21 bar) 150° F (66° C) 14° F (-10° C) 34 12
2 FRPV-403080EF 300 psi (21 bar) 150° F (66° C) 14° F (-10° C) 34 12
3 FRPV-4012030EF 300 psi (21 bar) 150° F (66° C) 14° F (-10° C) 34 12

INTENDED USE

The model FRPV-4030E Fiberglass RO/UF Pressure Vessel is designed for continuous, long-term use a as a housing for single reverse osmosis and ultrafiltration elements in typical commercial water treatment systems at pressures up to 300 psi.

Any make of 4″x 40″ nominal diameter spiral-wound element is easily accommodated. The model FRPV-4030E must be installed, operated and maintained in accordance with the listed precautions, and good industrial practice to assure safe operation over a long service life.

The high performance reinforced plastic shell must be allowed to expand under pressure; undue restraint at support points or piping connections can cause leaks to develop in the shell.

The end closure, incorporating close-fitting, interlocking metal components, must be kept dry and free of corrosion; deterioration can lead to catastrophic mechanical failure of the head assembly.

* Specifications subject to change without notice.

PRECAUTIONS

DO… read, understand and follow all instructions; failure to take every precaution will void warranty and may result in vessel failure.

DO… inspect end closures regularly; replace components that have deteriorated and correct causes of corrosion.

DO… provide overpressure protection for vessel set at not more than 105% of design pressure.

DO… mount shell on horizontal or vertical members at central span “S” using compliant, vessel supports; tighten hold down straps just snug.

DO NOT… pressurize vessel until double checking to verify that the retaining rings are in place.

DO NOT… work on any component until first verifying that pressure is relieved from vessel.

DO NOT… tolerate leaks or allow end closures to be routinely wetted in any way.

DO NOT… operate vessel with permeate pressure in excess of 125 psi at 120 °F (0.86 MPa at 49°C).

DO NOT… make rigid piping connections to parts or clamp vessel in any way that restricts growth of fiberglass shell under pressure; DIA = 0.01 in. (0.25 mm) and L = 0.3 in. (.8 mm) for a length code -1 vessel .

DO NOT… hang piping manifolds from parts or use vessel in any way to support other components.

DO NOT… operate at pH levels below 3 or above 11.

DO NOT… operate vessel at pressures and temperatures in excess of its rating.

FRPV Membrane Housing Measurements
Elements Part Number A B C
in (mm) in (mm) in (mm)
1 FRPV-4030EF 44.88”+ 0.08” (1140 + 2) Ø4.80”+ 0.08” (Ø122 + 2) Ø4.25”+ 0.08” (Ø108 + 2)
2 FRPV-403080EF 84.88”+ 0.08” (2156 + 2) Ø4.80”+ 0.08” (Ø122 + 2) Ø4.25”+ 0.08” (Ø108 + 2)
3 FRPV-4012030EF 124.88”+ 0.08” (3172 + 2) Ø4.80”+ 0.08” (Ø122 + 2) Ø4.25”+ 0.08” (Ø108 + 2)